Tag Archives: Automotive Gear Oils

SPC SYNGEAR OIL Synthetic Manual Transmision Fluid

SPC SYNGEAR OIL is a premium synthetic blend gear lubricant formulated for use in synchromesh manual gearboxes.

PERFORMANCE STANDARDS

SPC SYNGEAR OIL meets the following performance requirements:
•     API Service GL-4
•     DAF
•    Eaton Extended Drain (300,000km)
•     IVECO
•    Man 341 Type E-3 & Type Z-3
•    Renault (In accordance with Renault Note Technique B0032/2 Annex 3)
•     Volvo 97305
•    ZF TE-ML 02D

BENEFITS

SPC SYNGEAR OIL contains a special additive which provides the following benefits:

•    Continuous protection on gears operating under the severest conditions involving heavy dynamic and shock loads and very high or intermittent sliding speeds between the teeth.
•    Superior protection against gear-tooth and bearing wears.
•    Prevents oil deterioration and sludge formation.
•    Excellent antirust and anticorrosion properties on gears and bearings.
•    Minimize the formation of air bubbles and maintain lubricant flow and oil film.
•    Multigrade viscosity provides wide temperature operations.

APPLICATIONS

SPC SYNGEAR OIL is specially recommended for lubricating hypoid gears under heavy dynamic loads and high temperatures.

It can also be used in conventional gearboxes and steering-boxes on cars and trucks, and in gear-boxes, final drives and power take-off on farm and earth-moving machineries.

TYPICAL CHARACTERISTICS

SPC SYNGEAR OIL

ISO Grade: 80W90

Viscosity, Kinematic at 40 0C, cSt: 106, at 100 0C, cSt: 14.7

Viscosity Index: 143 Flash Point, COC, 0C: 200

Pour Point, 0C:

-39 Specific Gravity, 15/15 0C: 0.883

SPC SYN GL-5 Fully Synthetic Automotive Gear Lubricant

SPC SYN GL-5 is a premium quality fully synthetic heavy-duty axle oils. It is formulated for all gears operating under severe conditions and rigorous demands. PERFORMANCE STANDARDS SPC SYN GL-5 meets the following performance requirements: •    API Service GL-5, API MT-1 •    MIL-PRF-2105E, PG-2, MACK GO -J BENEFITS SPC SYN GL-5 contains a special additive… Continue Reading

SPC GL5 GEARLUBE LS Automotive Gear Oil

SPC GL5 GEARLUBE LS is an extreme pressure gear lubricant specially formulated for ‘Limited Slip’ rear drive differentials, especially ‘Cone Clutch’ design. The excellent friction properties provide smooth, noise free operation and extended life of these units. PERFORMANCE STANDARDS SPC GL5 GEARLUBE LS meets the following performance requirements: •     API GL-5 •     API… Continue Reading

SPC GL5 GEARLUBE Automotive Gear Oil

SPC GL5 GEARLUBE is an extreme pressure gear lubricant formulated for hypoid gears operating under severe conditions and for very highly loaded gears subjected to dynamic loads. PERFORMANCE STANDARDS SPC GL-5 GEARLUBE meets the following performance requirements: •    API GL-5 •    MAN 342M-2 •    ZF TE-ML 05A / 7A /12E / 16B / 16C/ 16D… Continue Reading

SPC GL4 GEARLUBE Automotive Gear Oil

SPC GL4 GEARLUBE is an extreme pressure gear lubricant formulated for hypoid gears and other gears operating under heavy loads. PERFORMANCE STANDARDS SPC GL4 GEARLUBE meets the following performance requirements: • API GL-4 BENEFITS SPC GL4 GEARLUBE provides the following benefits: •    Maintains strong oil film under high loading conditions. •    Provides good antiwear properties.… Continue Reading