SPC HITO HD is a high quality hydraulic oil specially developed for use in many hydraulic systems and equipment. The oil is formulated from selected paraffinic base stock treated with antirust, antioxidant and antiwear additives. The oil is available in a wide range of viscosities to suit all practical requirements.
PERFORMANCE STANDARDS
SPC HITO HD meets the following performance requirements:
• DIN 51524, Part II
• DENISON HF-2, HF-0
• Vickers M-2950-S (Mobile Equipment)
• Vickers I-286-S3 (Industrial Equipment)
• Cincinnati Milacron P-68, P-69 & P-70
• AFNOR NF E 48-603 (HM)
• US Steel 126, 127
BENEFITS
SPC HITO HD provides the following benefits:
• Minimises sludge and deposit formation.
• Performs excellent wear protection.
• Passes wet and dry Dension T6C pump test.
• Provides excellent filterability and tolerance to contamination.
• Maintains working components in clean operational condition.
• Exhibits robust oxidation, rust and corrosion protection.
• Good antifoam to prevent oil saturation and system failure.
• Prolongs useful service life of the oil and reduces maintenance cost.
APPLICATIONS
SPC HITO HD is recommended for use in most hydrodynamic power transmission systems, hydraulic controls and hydrostatic systems.
It is also suitable for use as heavy-duty lubricant for bearings, reduction units etc, where operating conditions require special antiwear properties. It is also suitable for use as circulating oil in general bearing lubrications.
TYPICAL CHARACTERISTICS
SPC HITO HD
ISO VG: 10, 15, 22, 32, 46, 68, 100, 150
Viscosity, Kinematic at 40 deg C, cst: 10.7 ,15.3, 22.3, 32.8, 47.6, 69.6, 100.0, 148.
at 100 deg C, cSt: 2.8, 3.5, 4.4, 5.6, 7.1, 8.9, 11.4, 14.5
Viscosity index: 106, 111, 104, 106, 105, 103, 100, 96
Specific Gravity, 15/15 deg C: 0.833, 0.840, 0.860, 0.870, 0.876, 0.883, 0.887, 0.893
Flash Point, COC, deg C: 146, 190, 208, 215, 220, 225, 230, 240
Pour Point, deg C: -30, -27, -21, -18, – 15, – 15, – 12, – 12