SPC SYN TURBOLUBE is a premium synthetic base turbine oil formulated with a unique additive chemistry. It delivers consistent and superior performance in steam, water, gas turbines and general bearing lubrication for industrial machineries such as turbo-blowers and air compressors etc.

PERFORMANCE STANDARDS

SPC SYN TURBOLUBE meets the following major turbine manufacturers’ lubricant specifications:

•    General Electric
•    Westinghouse
•    Siemens
•    Fiat Aviazioe
•    GEC
•    Alstom
•    Cooper
•    Solar
•    ABB

SPC SYN TURBOLUBE meets the following performance requirements:

Steam Turbine Oil Specifications:
•    MIL-L17672 D
•    DIN 51515 Part 1
•    Siemens / KWU TLV 9013 04/01

R & O Oil Specifications:
•    Denison HF 1
•    MIL- L17672 D
•    DIN 51524/1
•    AFNOR NFE 48603 HL

BENEFITS

SPC SYN TURBOLUBE provides the following benefits:
•    Excellent oxidation and thermal stability, which resists sludge and varnish formation and extends the service life of the oils.
•    Effective prevention of rust and corrosion.
•    Very good antifoam and air release properties that prevent erratic system operations.
•    Excellent demulsibility properties that separate entrained water quickly and prevent formation of emulsions.
•    Excellent low temperature stability.
•    Excellent filterability.

APPLICATIONS

SPC SYN TURBOLUBE is recommended for lubrication of steam, water, gas turbines and general bearing lubrication for industrial machineries such as turbo-blowers and air compressors etc. It is also recommended for hydraulic systems where antiwear additive is not required.

TYPICAL CHARACTERISTICS

SPC SYN TURBOLUBE
ISO VG 32 46 68
Viscosity, Kinematic
at 40 deg C, cSt 30 44 67.8
at 100 deg C, cSt 5.3 6.8 8.6
Viscosity Index 120 115 110
Specific Gravity, 15/15 deg C 0.865 0.870 0.875
Flash Point, deg C 215 220 230
Pour Point, deg C -40 -36 -36
Turbine oil Oxidation, ASTM D943
Time to 2.0 AN (hour)		 8500 8500 8500
Rotary Bomb Oxidation, ASTM D2272
Time to 25-psi Loss (min)		 1000 1000 1000
Rust, ASTM D665, A & B Pass Pass Pass
Demulsibility, ASTM D1401
40-40-0, min		 15 15 15
Foam Tendency / Stability
Sq I, ml/ml		 50/0 50/0 50/0
Sq II, ml/ml 0/0  0/0 0/0
Sq III, ml/ml 0/0  0/0 0/0